How to empty a pool with a garden hose
Although it is extremely rare to empty an underground pool, it is much more common to empty an above-ground pool, whether tubular or self-contained. Especially at the arrival of sunny days, so it is ready for the summer season. If the operation is not very complicated, there are some rules to follow so that this happens without incident.
Plan de l'article
Why empty an above-ground pool?
Although this is not necessary, many owners of above-ground pools prefer Drain the pool completely in order to prepare it for the summer season. Other reasons may, however, lead them to do so. This is especially the case if the pool, which has a small capacity, does not have a filtration system. Regular water renewal, which is cheaper and less polluting, will be preferable to chemical treatment. Another cause that could lead to the emptying of the above ground pool : whether it is incorrectly installed or if you want to move it.
A voir aussi : Concrete: convert m2 to m3
However, in many other cases, emptying is not mandatory. The water that has turned can be recovered through shock treatment. Similarly, it is quite possible to repair a leak in the lining . All you need is an underwater repair kit.
A lire aussi : How to inflate a pool
Draining an above-ground pool is subject to regulations
It is not commonplace to drain thousands of liters of water into nature, either directly into the garden or into the sewers.
An order of June 1994 clearly stipulates that it is “forbidden to introduce drainage water from swimming pools into wastewater collection systems”. However, a waiver is possible if you request prior authorization from the town hall or the prefecture.
If you do it directly in your garden, then make sure that the soil is able to absorb the amount of water. Otherwise, and if there was a flood, you’d be held responsible. You must then reimburse all damages, including damage to your neighborhood. To minimize the, perform the operation in the first days when the soil is no longer full of water and is not too dry.
Precautions to take before emptying your pool off
Before pouring the drain water from your above ground poolland into the sewer or garden, clear it from all pollutants. To do this, stop any treatment at least 7 days before the operation, or even 2 weeks.
Autonomous or tubular, an above-ground pool does not flow without taking a number of precautions , otherwise damaging the structure or pond. If it’s an Above all, don’t deflate the upper pudding… Lest you see a tide wave flowing in seconds!
Once emptied, do not leave the pool too long in the sun. Heat could damage the lining. If you need to bend the latter, dry it in advance, otherwise mold will grow.
To avoid wasting water, consider watering your garden or storing a portion in a water tank of rain.
Empty Above Ground Pool with Garden Hose
To empty your above ground, tubular or autonomous pool, nothing very complicated. Have a garden hose of sufficient length to connect the bottom of the pond to the place where you want water to drain (garden or sewer). Draw the air that is in the hose with your mouth until the water comes out. Then let the phenomenon of suction of air from water . For speed, you can use several pipes simultaneously.
If your above ground pool has a drain plug, connect it to the hose with the supplied adapter and proceed as before.
Drain an above-ground pool with a pump
Expensive (a few euros), using a pump to empty your pool above ground Little can save you a lot of time. In less than 3 hours, your pond will be dry!
Finally, if a few liters remain at the bottom of the basin, you can use a water vacuum cleaner or excavation by hand.
You read it: apart from some precautions to take, emptying your above ground pool is not very complicated. Nevertheless, if you do not have an all-in-one sewer or your garden does not have the ability to absorb several cubic meters, then turn to a professional for drainage fromyourpond.